8.Release agent

Chemical Name /
Chemical Formula /
Synonym Armeen 18D
Application 1.Used as internal release agent in the HDC curing system of ethylene acrylate copolymer,and the normal
dosage is 0.5phr.Increasing 18D can result in improbement in scorch safety,slight reduction in cure rate
and cure state.Compression set and tensile strength will be negatively influenced but these properties are
normally recovered after post-cure.
2.If 18D is used as retarder to improve scorch safety,the recommendation is to add 0.25phr increments.
3.It can bring vulcanizate with better properties after heat aging.